Shiftpoint Racing

Weapon R Boost Vacuum Manifold

4 Port Price $88.99
6 Port Price $94.99

Greddy Blow Off Valve Type RS

TYPE R std Price $254.99
TYPE R Stiff Spring Price $254.99

TYPE RS Price $229.99

Greddy Blow Off Valve Flange Adapter

Greddy Flange Outlet adapters are compatible to the Greddy Type S Blow off valve. This adapter is required to have the BOV installed properly.

16mm OUTLET Price $28.99
19-21mm OUTLET Price $28.99

19mm OUTLET Price $28.99
19mm OUTLET Price $28.99
28-35mm OUTLET Price $28.99
29mm OUTLET Price $28.99
29mm OUTLET Price $28.99
32mm OUTLET Price $28.99
34mm OUTLET Price $28.99
40mm OUTLET Price $28.99
45mm OUTLET Price $28.99
ALUM. FLANGE Price $46.99
R DIAPHRAGM Price $91.99
S DIAPHRAGM Price $91.99
STD R SPRING Price $48.99
STEEL FLANGE Price $43.99
STIFF R SPRING Price $48.99

Blowoff Valves

BLITZ Style BOV (New Style) Price $159.99

BLITZ Style BOV (Old Style) Price $119.99

SSQV BOV Price $119.99

Type-50mm BOV Price $207.99
Type-RS BOV Price $119.99
Type-S BOV Price $119.99

Type-WRX BOV Price $189.99

Greddy Turbo Timer

Black Price $114.99

Silver Price $114.99

Aluminum LED Toggle

Blue (SW24B) Price $29.99

Red (SW24R) Price $29.99

GReddy Oil Catch Tank

Super Light - Aluminum Price $123.99

T-Mounting Bracket Price $33.99
Traditional 15mm - Aluminum Price $123.99

Traditional 9mm - Aluminum Price $123.99

Greddy Oil Filter Block Adpr

GReddy Oil Filter Block adapters provide an easy way to install oil pressure and oil temperature gauge sensors. Now, one unit includes 3 different threads and 2 different o-ring diameters to fit most Japanese engines. Made from billet aluminum and simple to install, this adapter mounts between the oil filter and engine block.

Universal

Price $93.99
 

Universal - most Honda,Mazda,Mitsubishi & Subaru

Price $93.99

Universal - most Toyota, Nissan

Price $93.99

Universal - various Nissan (early SR20DET)

Price $93.99

PROFEC B-SPEC2

Based on the very popular B-Spec., the all new PRofec B-Spec. II's basic function to increase boost is as easy as the original, with an added built in boost pressure display and optional features like real-time, peak or last boost display (in either kPa or PSI). There are optional warning and boost limiter functions that can be programmed to offer much more control. The two presets values can be stored and are executed by a larger capacity inline solenoid valve. This unit does not require extensive programming and is ideal for low to high boost levels for single or twin turbos with actuator or external wastegates. The GReddy PRofec B-Spec. II is available in black or silver cased head units.
IP

Black Price $366.99
Silver Price $366.99

PROFEC E-01

GReddy's new super multi-tasker is the PRofec e-01 designed as a combination boost-controller, data display / logger and e-manage programmer. The e-01 can provide superior boost response, increased boost, warning meter functions, 3 channel data-logging and access to all the programming features provided with the latest e-manage support tool. Even when used as a boost controller only, the e-01 has features to smooth out the boost curve. With both an auto and manual setting for both external and actuator style wastegates, the new PRofec can alter its new compact, high capacity solenoid valve via various RPM ranges. The large LCD screen with green electro-luminescent backlighting is easy to see. Other standard features include two preset boost levels, a timed over-take boost and compatibility with our Remote Switching System. The data display can view 3 different data channels simultaneously such as boost, RPM or any other channel inputted by the e-manage. The data can be logged up for 3 hours on an SD card while also giving warning set points and peak and hold values. There is also a non-PRofec e-01 version that is only used for e-manage programming and datalogging. (Some features require optional harness to be accessed.)

IP

Price $572.99

PROFEC E-01 Accessories

Ext. Signal Harness Price $44.99

Pressure Sensor Harness Price $43.99

Remote Switching System Price $153.99

PROFEC Type-S

Greddy Profec Type-S Simple Boost Controller
As easy to use as a manual boost controller, but with advanced electronic boost controller response & consistency, the PRofec Type-S keeps things simple. Based on the ever-popular Original PRofec B-Spec, the Type-S has two rotary switches to select two independent boost setting (a Lo. and a Hi.), while another "Gain" switch compensates the wastegate’s valve response. Now, matched with a quick acting, large capacity inline control solenoid, the Type-S can increase boost as high as 3.0kg/cm2 (42.66psi) and it works with both integral and external wastegate set-ups, while still being compatible with our Remote Switching System or SCC & adapter.
Features:
The Greddy PRofec Type-S Boost Controller is as simple to set as a manual boost control and features electronic response.
PRofec Type-S Boost Controller is based on the original B-spec but features a higher capacity solenoid valve.
Increased boost has never been easier to achieve. Simply turn the knob on one of the two factory presets, "LO" or "HI".
"GAIN" boost adjustment helps promote wastegate compensation and keep constant boost.
High volume solenoid valve and press sensor take full advantage of faster wastegate response and consistency. 

IP

Price $372.99

Remote Switching System

Our Remote Switching System allows the user hands-free modulation between high boost and low boost settings on either of our PRofec boost controllers. It can also be used as a momentary switch for nitrous, line lock, etc., when used with our optional voltage adapter kits.  

12 volt OPTIONAL HARNESS Price $63.99

5 volt OPTIONAL HARNESS Price $37.99

Remote Switching System Unit Price $152.99

Speed Cut Controller

Greddy Speed Cut Controller
The unit must be wired directly into the factory ECU harness. While our new Speed Cut Controller eliminates factory speed cut off for most Nissans and Toyotas. An added feature for the SCC is it speed trigger feature that can be used on future products.

OPT. PROFEC SPD Harness Price $41.99

Speed Cut Controller Type A Price $99.99

AC-Autotechnic VTEC Controller
AC Autotechnic introduces a simple and affordable way to adjust the VTEC actuation point on Honda vehicles equipped with VTEC. The Digital VTEC Power Controller is an ideal upgrade for vehicles on or off the racetrack.

Price $188.99

E-Manage Blue

Greddy E-MANAGE - ENGINE CONTROL UNIT MANAGER
Greddy e-Manage is an inexpensive programmable fuel management system that allows you to properly tune your factory fuel system without having to change the entire factory ECU system to an expensive "stand-alone" unit. The e-Manage system is a universal "piggy-back" type unit which taps into most Japanese factory ECU wiring, by utilizing the existing sensors. Basic functions will allow the user to slightly alter factory injector duty-cycle (± 20% at 5 preset RPM points) by intercepting and altering airflow or MAP sensor signals. For Honda VTEC cars you can adjust the VTEC shift point. Additional features are built into the system but are only accessible through the use of the e0-1 programmer or our PC-Windows based "e-Manage Support Tool" communication software (Please see our Authorized GReddy Support Dealers for more information). There is a 16x16 airflow adjustment map, larger main injector correction adjustment, upgrade air flow meter adjustment, boost limiter cut, anti-engine stall, VTEC-fuel adjustment, real-time map trace, real-time display, real-time communication and basic Data-logging. With the use of our "Optional Injector Harness" and the software, the unit has the ability to control an additional 16x16 injector duty cycle map and the controls for adding up to 2 additional sub-injectors. If the "Optional Ignition Harness" and the software are used the unit has the ability to control a 16x16 ignition timing map. All of the above maps can also be map-traced in real-time as well. If the factory range of map or airflow meter is surpassed, you can incorporate our "Optional GReddy Pressure Sensor and Pressure Harness" to set larger scales of adjustment. All installation and tuning should only be made by a trained technician with proper air/fuel monitoring tools. (Some functions may not be compatible with some applications.) 

Part # HPF-GEM

Price $329.99

Multi Switching System

GReddy's Multi Switching System (MSS) is a two-channel programmable general output controller. The MSS is cockpit-mounted and wires into a vehicle's ECU harness and/or optional GReddy sensors and the electronic devices you want to control. The MSS can control up to 2 separate electronic devices with the capability of turning on and off nitrous, solenoids, I/C-sprayers, warning lamps and many other electronic devices. Each channel can be programmed to activate through one, two or three parameters such as RPM, speed, temperature, boost or any other analog signal. With GReddy's optional MSS Relay Kit, you can activate fuel pumps, electric fans and other higher drawing items. The multi color display can also monitor the inputted signals for peak-hold and warning values.  

Multi Switching System Unit 120W (10A) max 2ch 
Price $214.99

Relay Kit for MSS ONLY 240W (20A) max

Price $61.99